This is an archived, read-only copy of the United-TI subforum , including posts and topic from May 2003 to April 2012. If you would like to discuss any of the topics in this forum, you can visit Cemetech's
Technology & Calculator Open Topic subforum. Some of these topics may also be directly-linked to active Cemetech topics. If you are a Cemetech member with a linked United-TI account, you can link United-TI topics here with your current Cemetech topics.
Calculator Tech Support =>
Technology & Calculator Open Topic
| Author |
Message |
|
thejakenixon
Newbie
Joined: 02 Nov 2010
Posts: 5
|
 Posted: 03 Nov 2010 12:15:01 am Post subject: |
|
|
| So today I saw something about the gameboy emulator, so I wanted to try it. I downloaded ndless and the nleash thing to get back to 1.1 from 2.1. Once I ran the ndless thing about a minute in when it wanted to reboot for a 2nd time it stopped responding. The screen is off, I'm plugging it in with USB and my Windows 7 laptop isn't recognizing it, not even with the device connected sound. My Nspire is totally unresponsive at the moment. I've removed the 4 AAA batteries for around 20 minutes and tried the Home+Enter+P+ON thing and even held the reset button on the back for a few minutes. Should I try something with the 84+ keypad in, or is my calculator permanently broken? It said the batteries were at 50% before this whole process, so I don't think the batteries are dead. What can I do? |
|
| Back to top |
|
|
Goplat
Advanced Newbie
Joined: 26 Jun 2007
Posts: 95
|
| Posted: 03 Nov 2010 12:49:45 pm Post subject: |
|
|
thejakenixon wrote:
So today I saw something about the gameboy emulator, so I wanted to try it. I downloaded ndless and the nleash thing to get back to 1.1 from 2.1. Once I ran the ndless thing about a minute in when it wanted to reboot for a 2nd time it stopped responding. The screen is off, I'm plugging it in with USB and my Windows 7 laptop isn't recognizing it, not even with the device connected sound. My Nspire is totally unresponsive at the moment. I've removed the 4 AAA batteries for around 20 minutes and tried the Home+Enter+P+ON thing and even held the reset button on the back for a few minutes. Should I try something with the 84+ keypad in, or is my calculator permanently broken? It said the batteries were at 50% before this whole process, so I don't think the batteries are dead. What can I do?
Did you take the batteries out with the USB disconnected? If the USB is connected to a computer, that might keep the power on. |
|
| Back to top |
|
|
thejakenixon
Newbie
Joined: 02 Nov 2010
Posts: 5
|
| Posted: 03 Nov 2010 01:47:12 pm Post subject: |
|
|
Goplat wrote:
thejakenixon wrote:
So today I saw something about the gameboy emulator, so I wanted to try it. I downloaded ndless and the nleash thing to get back to 1.1 from 2.1. Once I ran the ndless thing about a minute in when it wanted to reboot for a 2nd time it stopped responding. The screen is off, I'm plugging it in with USB and my Windows 7 laptop isn't recognizing it, not even with the device connected sound. My Nspire is totally unresponsive at the moment. I've removed the 4 AAA batteries for around 20 minutes and tried the Home+Enter+P+ON thing and even held the reset button on the back for a few minutes. Should I try something with the 84+ keypad in, or is my calculator permanently broken? It said the batteries were at 50% before this whole process, so I don't think the batteries are dead. What can I do?
Did you take the batteries out with the USB disconnected? If the USB is connected to a computer, that might keep the power on.
Yeah I did. Figured out that it was a problem with the batteries, I replaced them and it seems to work now. Only problem is that whenever I try and turn the calculator on normally now (after control+off or it auto turning off) I have to take out a battery for a few seconds before it can boot up, it seems to be a problem with OS 1.1. Now is there any way to fix this new problem? |
|
| Back to top |
|
|
Smartzkid
Newbie
Joined: 30 Jan 2010
Posts: 27
|
| Posted: 03 Nov 2010 06:07:18 pm Post subject: |
|
|
Upgrade to OS 1.4 or 1.7. From what I hear, ndless 1.7 supports both.
To get ndless 1.7, you need to download the most current version from the public repository (don't know the url off the top of my head) and compile it. |
|
| Back to top |
|
|
|
Register to Join the Conversation
Have your own thoughts to add to this or any other topic? Want to ask a question, offer a suggestion, share your own programs and projects, upload a file to the file archives, get help with calculator and computer programming, or simply chat with like-minded coders and tech and calculator enthusiasts via the site-wide AJAX SAX widget? Registration for a free Cemetech account only takes a minute.
»
Go to Registration page
